Green electricity for the wind energy industry: The Nordex Group relies on LandStrom for the energy supply of its service points in Germany. Hamburg/Gevensleben, 9 April 2025. Sustainable energy for the wind energy sector: 14 Nordex service points are now supplied with 100 percent green electricity from LandStrom. The aim of the cooperation is to […]
Hamburg, 7. April 2025. To ensure the proper development and continuous service life of wind turbines, the international standard IEC 61400 specifies technical requirements for the design of wind turbines. An independent certification body must confirm compliance with these standards. This also includes the comprehensive structural testing of rotor blades according to IEC 61400-23. This […]
DGAP-Media / 01.09.2021 / 09:18 Hamburg, 1 September 2021 On August 31st 2021, the Nordex Group installed the first N163/5.X turbine in the Delta4000 series as planned in the citizen wind farm “Janneby” in Schleswig-Holstein, Germany. With its approx. 80-metre rotor blades and a rotor sweep of 20,867 square metres, the N163/5.X is currently the […]
DGAP-Media / 01.09.2021 / 09:18 Hamburg, 1 September 2021 On August 31st 2021, the Nordex Group installed the first N163/5.X turbine in the Delta4000 series as planned in the citizen wind farm “Janneby” in Schleswig-Holstein, Germany. With its approx. 80-metre rotor blades and a rotor sweep of 20,867 square metres, the N163/5.X is currently the […]
Hamburg, 14 January 2021. The Nordex Group has obtained the accreditation in Brazil for the N163/5.X wind turbine model from BNDES – National Bank for Economic and Social Development, which is the largest public development bank in the country. As a result, Nordex Group customers in Brazil will be able to purchase N163/5.X wind turbines […]
DGAP-Media / 02.12.2020 / 07:30 – Second N149/5.X turbine installed Hamburg, 2 December 2020. On 30 November 2020 the Nordex Group received the IEC Type Certificate, which is valid worldwide, in accordance with the standard IEC 61400-22 for the N149/5.X turbine from TÜV SÜD. In September the Nordex Group installed the first N149/5.X in the […]
DGAP-Media / 02.12.2020 / 07:30 – Second N149/5.X turbine installed Hamburg, 2 December 2020. On 30 November 2020 the Nordex Group received the IEC Type Certificate, which is valid worldwide, in accordance with the standard IEC 61400-22 for the N149/5.X turbine from TÜV SÜD. In September the Nordex Group installed the first N149/5.X in the […]
DGAP-Media / 01.12.2020 / 07:30 Hamburg, 1 December 2020. After only four months of construction work the Nordex Group has started up its new mobile concrete tower production plant in Spain. In Motilla del Palancar, in Castilla-La Mancha, a production facility for concrete towers covering more than 120,000 square metres has been set up. The […]
DGAP-Media / 01.12.2020 / 07:30 Hamburg, 1 December 2020. After only four months of construction work the Nordex Group has started up its new mobile concrete tower production plant in Spain. In Motilla del Palancar, in Castilla-La Mancha, a production facility for concrete towers covering more than 120,000 square metres has been set up. The […]
Hamburg, 17 November 2020. The Nordex Group has optimized the aerodynamics of the rotor blades of a total of 80 N100/2500 wind turbines for the long-standing Turkish customer, Eksim. By installing the vortex generators, the power output of the older generation turbines will be increased by up to 2%. The Nordex Group offers its customers […]