| 1. |
The Rotor Blades are made of glass fibre reinforced plastic. The rotor is pitch regulated. |
2. |
The Hub is made of cast iron. |
| 3. |
The Turbine Frame is made of ductile cast iron. A superior material with regards to strength, vibration and noise reduction features. |
4. |
The Rotor Bearing is a solid double spherical roller bearing with a ductile cast iron casing. |
| 5. |
The Rotor Shaft is made of ductile cast iron. |
6. |
The Gearbox is a custom design 2-stage planetary gear. |
| 7. |
The Disk Brake is equipped with two brake calipers and located on the high speed shaft of the gearbox. |
8. |
The Generator Coupling is a flexible coupling. |
| 9. |
The Generator is a 2500 kW liquid cooled double-fed asynchronous generator. |
10. |
The Cooling Radiator is a part of the gearbox cooling system. |
| 11. |
The Fan Coolers for the generator cooling. |
12. |
The Wind Measuring System consists of a redundant anemometer and wind vane, which measures the wind conditions and gives signal to the turbine control system. |
| 13. |
The Control System monitors and controls the operation of the wind turbine. |
14. |
The Hydraulic System maintains and controls the hydraulic pressure to the disc brakes and the yaw brake system. |
| 15. |
The Yaw Drive consists of 2 planetary yaw gears, driven by frequency controlled electrical motors. |
16. |
The Yaw Bearing is a 4-point ball-bearing with outer teething.In addition the turbine is equipped with an active yaw disc brake system. |
| 17. |
The Nacelle Cover is made of glass fibre reinforced plastic on a steel frame. |
18. |
The Tower is a tubular steel structure which can be delivered in various heights. |
| 19. |
The Pitch system consists of 3 independent pitch gears, driven by electrical motors. |
|
|
